shop cabinet woodwork

Right alongside my new studio in the lake cottage, there’s a little nook. It’s the sort of space that begs for a bit of custom shelving to fill it and I knew at once it would be my little studio shop, if only I could fit it out nicely. When I spotted a beat up old buffet & hutch going for a song, I bought it.

damaged cabinet

While I may claim some talents, measuring accurately the first time is not one of them. Oh, dear. To fit this particular cabinet, a bit of woodwork was required!

cabinet cornice

I already knew that the top edge of the cabinet was badly damaged – but it wouldn’t be seen once in the nook. I’m not fond of such a generous curve in the top molding, and needed to remove it to fit, so I marked a line and sawed it off.

cabinet sawing

And cleaned up the edge on both sides so the piece would slide in nicely. Sawing with a really good, sharp saw is so pleasing! I studied up in advance, as I’ve not handled a saw in some time.

cabinet marked

I had known when I bought it that the edge of the buffet needed to lose half an inch, though I’d had some crazy idea about planing the thing off. Once I measured (hmm, properly) I could see I needed to cut it.

cabinet - sawn

I was rather impressed with myself for sawing it freehand. Don’t be afraid of this kind of work! It is just as satisfying as splitting wood with an axe.

However. I hadn’t expected to face solidly glued, nailed molding at the base, sticking out far too widely on each side to ever get the cabinet into the nook.

cabinet- corner molding

Don’t despair, as I did. Come back and see how I solved it!

Related Posts